Category: Zero

(Results from 1 to 10)
Warranty information on Allegion Commercial products.
For Warranty information, visit us.allegion.com/warranty or contact Customer Service at 877-671-7011.   ...
Automatic Operators | Biometrics | Credentials | Door Controls | Electronic Locks | Exit Devices | Key Systems | Mechanical Accessories | Mechanical Locks | Power Supplies | Readers | Security Management | Software | System Components | Falcon | Glynn-Johnson | Ives | LCN | Schlage | Schlage Electronics | Steelcraft | Von Duprin | | Dexter | Zero | Sealing Systems | Readers » IP Based
What gauge is the Zero 43STST
The gauge for the 43STST is 12....
Zero
What is a split astragal?
Split astragals are the same as 2 piece astragals such as the Zero 55/155...
Zero
Unable to find Advantage Product T4G
The T4G was discontinued 8/30/2016....
Zero
What are some of the causes of Zero weatherstripping / gasketing coming off of door?
There are some things to consider: Were materials stored for a long duration?  (over six months) If the tolerances are too tight on the door or if materials were stretched during instal...
Zero
Should I use Cam Lift Hinges on a door with an Auto Opener?
Cam lift hinges are not necessary on doors with auto openers....
Zero
What is the purpose of the magnet inside some of the Zero automatic door bottoms (ADB)?
The magnet assists with the door bottom staying in the "up" position.  It takes a load off the mechanical components.  It is only included on certain door bottoms (367, 368, 369) that are gr...
Zero
Can the Zero 2361 have a different finish?
When using the 2361 in an application along with another piece such as 232/233/237 the 2361 is an anodized piece and does not match the mill finish of the other pieces exactly.  When they are p...
Zero
Zag Scoring Zero Seals
Seals ordered with Zag are scored every 6" to assist with anti ligature sensitive  applications....
Zero
What weld options are available for Zero thresholds?
The aluminum plates with a threshold rest  such as #268, 68, 168, 105 & 106-can be spot welded. When multiple plates are being used with a connector like #269 or 469,  these can also b...
Zero

Support by product