Category: Sealing Systems

(Results from 1 to 10)
Warranty information on Allegion Commercial products.
For Warranty information, visit us.allegion.com/warranty or contact Customer Service at 877-671-7011.   ...
Automatic Operators | Biometrics | Credentials | Door Controls | Electronic Locks | Exit Devices | Key Systems | Mechanical Accessories | Mechanical Locks | Power Supplies | Readers | Security Management | Software | System Components | Falcon | Glynn-Johnson | Ives | LCN | Schlage | Schlage Electronics | Steelcraft | Von Duprin | | Dexter | Zero | Sealing Systems | Readers » IP Based
What determines the cope of my threshold?
The shape of the frame determines the coping....
Sealing Systems » Thresholds
Can Torx screws be used on thresholds?
Yes, our Torx screws can be used to secure any of our thresholds....
Sealing Systems » Thresholds
How can I achieve a 10" Threshold?
The best way to achieve this is using 678 plate with a 268 on each end - this will make a 10" threshold which is 3/8" high (which in most cases is still ADA compliant) This method allows the 3 p...
Sealing Systems » Thresholds
Do automatic door bottoms (ADB) require Z49 end caps in order to use the optional “Pull Out” feature?
Do auto door bottoms require Z49 end caps in order to use the optional “Pull Out” feature? No, the Z49 end caps don’t have anything to do with the “pull out” function.  They are a...
Sealing Systems » Automatic Door Bottoms / Sill Protection
Can an automatic door bottom (ADB) be cut down to size at the factory?
Yes.   LIst automatic door bottom size needed on PO.   Allegion will contact you if size not available. ...
Sealing Systems » Automatic Door Bottoms / Sill Protection
How Do I Clean or Maintain My Zero Automatic Door Bottom (ADB) ?
How do I clean my Automatic Door Bottom (ADB)? Zero Automatic Door Bottoms can be cleaned with mild soap and warm water and a non-abrasive sponge or cloth. Do not use any harsh solvents or cleaner...
Sealing Systems » Automatic Door Bottoms / Sill Protection
Does the Auto door bottom model 360 have a set screw only if it has a pull out option?
The set screw secures the internal components within the track and is present whether the unit has a pull out option or not.   ...
Sealing Systems » Automatic Door Bottoms / Sill Protection
How do I re-hand an auto door bottom
Only the 321 & 323 Automatic Door Bottoms (ADB) need to be re-handed by rearranging internal parts.  For these ADB's, you can remove the set screw from the side of the unit, then from one end...
Sealing Systems » Automatic Door Bottoms / Sill Protection
Is the Z49 option available on 3551 Auto Door Bottom?
Z49 is not available for the 3551 ADB because it is designed for hollow metal doors with the inverted channel.     The way it is designed there would be no place for the Z49 to f...
Zero | Sealing Systems » Automatic Door Bottoms / Sill Protection